HL-4200CN
![]() |
FAQ & Fehlerbehebung |
![](/g/b/img/product/hl4200cn_all.jpg)
HL-4200CN
Datum: 27.01.2014 Kennnummer: faq00000107_000
How do I clean the Density Sensor?
-
On the printer's right side, press the side of the power switch marked [O] to turn off the printer.
-
Push up button "A" (1) and fully open the front cover (2).
-
Grip the orange tabs at both ends of the transfer roll and gently lift it out of the printer.
Lift the roll carefully to prevent waste toner from spilling out.
-
Gently wipe the density sensor window with a clean dry cloth or cotton swab.
Do not allow anything hard to come in contact with the density sensor window. Do not use excessive force to clean the window.
-
Replace the transfer roll cartridge. Grip the orange U-shaped tabs as shown.
-
Insert the pins at both ends of the transfer roll cartridge into the bearings inside the printer.
-
To lock the transfer roll cartridge into the printer, push down on the tabs until you hear a click.
-
Close the front cover.
-
On the printer's right side, press the side of the power switch marked [I] to turn on the printer.
Relevante FAQ
HL-4000CN, HL-4200CN
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.