FAQs & Troubleshooting

Close

MFC-9120CN

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-9120CN

Not your product?

Date: 04/11/2011 ID: faq00000309_011

Jam Rear

If the LCD shows "Jam Rear", a paper jam occurred behind the face-up output tray.
To clear paper jams, please follow the steps below.

 

Please confirm that you have installed all toner cartridges and drum units in the machine. Failure to install these items or improper installation may cause a paper jam in the machine.

 

If the error message remains, open and close the top cover and fuser cover firmly to reset the machine.

 

  1. Turn off the machine's power switch. Unplug the telephone line cord first (if applicable), disconnect all cables, and then unplug the power cord from the AC power outlet (electrical socket).
     
  2. Open the back cover. 

    HOT SURFACE
    After you have just used the machine , some internal parts of the machine will be extremely hot. Wait at least 10 minutes for the machine to cool down before continuing to the next step.

    open the back cover


  3. Push down and pull the green tabs at the left and right hand sides toward you and fold down the fuser cover (1).

    push down and pull the green tabs

     
  4. Using both hands, gently pull the jammed paper out of the fuser unit.

    pull the jammed paper



  5. Close the fuser cover (1).

    close the fuser cover

     
  6. Fully close the back cover.

  7. Plug the machine's power cord back into the AC power outlet (electrical socket) first, and reconnect all cables and the telephone line cord (if applicable). Turn on the machine's power switch.

Related FAQs

Related Models

DCP-9010CN, MFC-9010CN, MFC-9120CN, MFC-9320CW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.