MFC-J497DW
 |
Vanliga frågor & felsökning |
Forward a fax to another fax machine when my machine has a mechanical issue.
You can transfer faxes in the memory of your machine if one of the following messages is displayed on the machine's display (hereinafter called LCD):
-
Unable to Clean XX (Clean Unable XX)
-
Unable to Initialize XX or Unable to Init. XX (Init Unable XX)
-
Unable to Print XX (Print Unable XX)
-
Unable to Scan XX (Scan Unable XX)
-
Press Stop/Exit to interrupt the error temporarily.
-
Press Settings and select Service > Data Transfer > Fax Transfer.
-
Do one of the following:
-
If the LCD displays No Data, there are no faxes left in the machine's memory.
Press 
, and then press Stop/Exit.
-
Enter the fax number where faxes will be forwarded.
-
Press Black (Mono) Start.
-
If you have not set up your Station ID, you cannot enter Fax Transfer mode.
> Click here to see how to set up the Station ID.
-
You can send the Fax Journal report to another fax machine.
Press Settings and select Service => Data Transfer => Report Trans. in STEP 2.
Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?
Har du tittat efter i manualerna?
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
