Follow the steps below to use the 2-sided(duplex) copy feature:
2 in 1 (ID), Poster, Book Copy* and Fit to Page are not available with 2-sided Copy.
*for some available models
You can only use plain paper sizes A4, A5, Letter or Executive (for some countries).
Load your document.
Press (Copy).
Enter the number of copies you want.
Press Options.
If you want to sort multiple copies, press the Up or Down arrow key to display Stack/Sort.
Press Stack/Sort.
Press Sort.
Press the Up or Down arrow key to display 2-sided Copy.
Press 2-sided Copy.
Press the Up or Down arrow key to display the 2-sided copy type you want, and press Portrait Long Edge Flip, Landscape Long Edge Flip, Portrait Short Edge Flip or Landscape Short Edge Flip.
(For some models with ADF) Read and review the message on the Touchscreen, and then press OK.
Review you settings on the Touchscreen, and then press OK.
Press Black (Mono) Start or Color (Colour) Start. If you placed the document in the ADF (for applicable models), the machine scans the pages and starts printing. If you are using the scanner glass, go to step14.
The Touchscreen shows: Turn over the document (or Flip the book), then press [Scan]. When you finish, press [Comlete]. Place the next page on the scanner glass and press Scan. Press OK. The machine starts printing.
If you pressed Sort for multiple copies, repeat step14 for each additional page. After all the pages have been scanned, press Complete.
DO NOT touch printed page until it is ejected the second time. The machine will print the first side, and eject the paper, and then pull the paper in to print the second side.
If you get a paper jam, press Advanced after step 9, and then press one of the jam prevention settings: 2-sided 1 or 2-sided 2. 2-sided 1 uses a longer print time for the ink to dry. 2-sided 2 uses a longer print time and will also print in lighter colors.
Dacă nu aţi primit răspuns la întrebarea dumneavoastră, aţi verificat celelalte întrebări frecvente?
(Copy).
