4234D
FAQ et Diagnostic |
Preparation before threading
Thread tree
- Raise the telescoping thread tree to its highest position.
Make sure that the thread holders are in alignment above the spool pins as illustrated below.
Thread holder on thread tree
Spool pin
Correct position
Thread spool cap
- When using sewing thread spools, the thread spool cap should be used as illustrated below.
Make sure that the spool notch is on the bottom.
Thread spool cap
Thread net
- If you are sewing with loosely spun nylon thread, we recommend that you cover the spool with the net supplied to prevent the thread from slipping off the spool.
Adapt the net to the shape of the spool.
Before threading
- Turn off the main power and light switch for safety.
- Raise the presser foot using presser foot lever.
- Turn the hand wheel so that the mark on the hand wheel <A> is aligned to the line <B> on the machine.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.