HL-5280DW
 |
Ofte stillede spørgsmål og fejlfinding |
Enable the Brother machine's network interface.
Follow the steps below to enable or disable the Brother machine's network interface.
A wired and a wireless network connection cannot be used at the same time. Enable the network connection type you want to use and then disable the other.
-
Press the + or - button to select LAN or Network. Press OK or Set.
-
Press the + or - button to select Wired or WLAN. Press OK or Set.
-
Press the + or - button to select Wired Enable or WLAN Enable. Press OK or Set.
- Press the + or - button to select On or Off. Press OK or Set.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Relaterede ofte stillede spørgsmål
- I'm trying to install the driver with network settings, but I cannot locate a network connected Brother machine and complete the driver installation. (For Windows)
- The printer status is Offline or Paused.
- I cannot print using my Brother machine on a wireless network (Mac)
- I cannot print using my Brother machine on a wireless network (Windows)
- I cannot print using my Brother machine on a wired network. (Windows/macOS)
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
