HL-5350DN
 |
ЧЗВ и отстраняване на неизправности |
Print overrun
Please do the following:
-
Press Go to print the remaining data in the printer memory. Cancel the print job, if you want to delete the remaining data in the printer memory.
-
Reduce the complexity of your document or lower the print resolution.
-
Add more memory.To learn how to install additional memory, click here.
-
Set page protection to AUTO by using the supplied Windows driver.
-
Change the following settings in the Windows printer driver and try again. The best combination of the settings below will vary depending on your document:
+Graphics *
+TrueType mode *
+Use Printer TrueType® Fonts
* To change these settings, click 'Basic' tab of the printer driver. Select 'Manual' in the 'Print Settings' section. Click 'Manual Setting...'.
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.
