FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 2Color thread table
- 3How to Embroider on Cap. [Video instructions]
- 4How to set up the cap frame. [Video instructions]
- 5How to set up the cap frame driver. [Video instructions]
- 6How to Embroider on Bag. [Video instructions]
- 7How to Embroider on Pet Collar. [Video instructions]
- 8How to Embroider on Shoes. [Video instructions]
- 9What is DST ?
- 10When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 11How do I use the embroidery sheet ?
- 12Colors of Tajima (.dst) embroidery data
- 13Creating Beautiful Embroidery ( Hooping techniques )
- 14The thread tension is incorrect.
- 15Why does the needle keep breaking?
- 16Loops appear on the surface of the fabric when embroidering.
- 17How do I change the needle?
- 18How do I resume embroidering after turning off the machine ?
- 19Maintenance (Cleaning the thread paths of the upper threads)
- 20Stabilizers (Backing)
- 21Embroidery pattern does not sew out correctly.
- 22How do I adjust the tension of the bobbin thread ?
- 23Maintenance (Cleaning the bobbin case)
- 24"Preventive maintenance is recommended" appears on the LCD.
- 25"This pattern cannot combine." message appears on the LCD. What does it mean?
- 26How do I adjust the tension of the upper thread ?
- 27"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 28"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?
- 29"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 30"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 31Maintenance (Cleaning around the needle plate)
- 32Bobbin thread does not wind neatly on the bobbin.
- 33"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 34How do I embroider on small pieces of fabric ?
- 35How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 36Creating Beautiful Embroidery (Threads)
- 37How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 38How do I wind the bobbin?
- 39How do I install the bobbin wound with thread?
- 40Nothing happens, even if the LCD display is pressed.
- 41"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 42How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 43Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 44How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 45What is Wiper ?
- 46Maintenance (Oiling the machine)
- 47Maintenance (Clean the hook)
- 48"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 49Why does the upper thread keep breaking?
- 50Fabric/stabilizer compatibility chart