FAQs & Troubleshooting
Popular |
58 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 2How to use the Multi-purpose Screwdriver.
- 3How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 4How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 5How do I clean the race?
- 6When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 7When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 8How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 9Embroidery
- 10When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 11Where do I put the oil in my machine?
- 12How do I remove or attach the Embroidery foot ?
- 13"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 14Fabrics and stabilizer material for embroidery
- 15How do I attach or remove the Embroidery Unit?
- 16How do I change the needle ?
- 17"This USB media is incompatible." message appears on the LCD. What does it mean?
- 18"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 19"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 20"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 21"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 22"Transmitting by USB" message appears on the LCD. What does it mean?
- 23"USB media error" message appears on the LCD. What does it mean?
- 24"This USB media cannot be used." message appears on the LCD. What does it mean?
- 25Why is the outline sewing off the pattern?
- 26"Preventive maintenance is recommended" appears on the LCD.
- 27Upper threading (Point)
- 28When thread got tangled.
- 29If the thread breaks during sewing.
- 30"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 31"This file cannot be used." message appears on the LCD. What does it mean?
- 32"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 33"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 34"Set the clock." message appears on the LCD. What does it mean?
- 35How do I change the volume of operation sounds or alarm sounds?
- 36How do I thread my machine ?
- 37How do I set the bobbin ?
- 38"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 39"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 40"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 41"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 42How do I attach or remove the embroidery frame ?
- 43How do I adjust the clock on the display?
- 44"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 45"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 46"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 47Why does the lower thread keep breaking?
- 48"Failed to save file." message appears on the LCD. What does it mean?
- 49"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 50"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?