FAQs & Troubleshooting
Popular |
Innov-is V3
58 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
2.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
3.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
4.
How to use the Multi-purpose Screwdriver.
5.
How do I clean the race?
6.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
7.
How do I set the bobbin ?
8.
Where do I put the oil in my machine?
9.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
10.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
11.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
12.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
13.
"This USB media is incompatible." message appears on the LCD. What does it mean?
14.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
15.
"Preventive maintenance is recommended" appears on the LCD.
16.
How do I change the needle ?
17.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
18.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
19.
"Set the clock." message appears on the LCD. What does it mean?
20.
How do I remove or attach the Embroidery foot ?
21.
How do I thread my machine ?
22.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
23.
"This USB media cannot be used." message appears on the LCD. What does it mean?
24.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
25.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
26.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
27.
Fabrics and stabilizer material for embroidery
28.
When thread got tangled.
29.
"This file cannot be used." message appears on the LCD. What does it mean?
30.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?