FAQs & Troubleshooting
 |
Popular |
58 Results
- 1How to use the Multi-purpose Screwdriver.
- 2When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 3How do I change the volume of operation sounds or alarm sounds?
- 4How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 5"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 6How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 7How do I attach or remove the Embroidery Unit?
- 8How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 9Embroidery
- 10"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 11How do I create a space between characters?
- 12"Transmitting by USB" message appears on the LCD. What does it mean?
- 13How do I remove or attach the Embroidery foot ?
- 14How do I adjust the clock on the display?
- 15How do I set the bobbin ?
- 16How do I wind the bobbin?
- 17"This USB media cannot be used." message appears on the LCD. What does it mean?
- 18How do I clean the race?
- 19"Preventive maintenance is recommended" appears on the LCD.
- 20When thread got tangled.
- 21"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 22"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 23"Set the clock." message appears on the LCD. What does it mean?
- 24"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 25"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 26"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 27"USB media error" message appears on the LCD. What does it mean?
- 28"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 29"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 30"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 31Why does the lower thread keep breaking?
- 32Upper threading (Point)
- 33When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 34How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 35If the thread breaks during sewing.
- 36"This file cannot be used." message appears on the LCD. What does it mean?
- 37"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 38"Failed to save file." message appears on the LCD. What does it mean?
- 39How do I attach or remove the embroidery frame ?
- 40How do I change the needle ?
- 41How do I thread my machine ?
- 42Where do I put the oil in my machine?
- 43"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 44"This USB media is incompatible." message appears on the LCD. What does it mean?
- 45"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 46"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 47"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 48"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 49"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 50"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
