FAQs & Troubleshooting
Popular |
Innov-is V3
58 Results
1.
How to use the Multi-purpose Screwdriver.
2.
Embroidery
3.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
4.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
5.
How do I set the bobbin ?
6.
Where do I put the oil in my machine?
7.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
8.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
9.
When thread got tangled.
10.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
11.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
12.
How do I attach or remove the embroidery frame ?
13.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
14.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
15.
"Transmitting by USB" message appears on the LCD. What does it mean?
16.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
17.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
18.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
19.
Why does the lower thread keep breaking?
20.
"Preventive maintenance is recommended" appears on the LCD.
21.
If the thread breaks during sewing.
22.
How do I create a space between characters?
23.
"This USB media is incompatible." message appears on the LCD. What does it mean?
24.
"USB media error" message appears on the LCD. What does it mean?
25.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
26.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
27.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
28.
"This file cannot be used." message appears on the LCD. What does it mean?
29.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
30.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?