FAQs & Troubleshooting
Popular |
65 Results
- 1Place a spool of thread on a spool pin.
- 2It is difficult to pass the thread through the needle bar thread guide(hook).
- 3How do I create a space between characters?
- 4When thread got tangled.
- 5How do I sew an applique?
- 6When should I use the extra spool pin?
- 7How do I load the spool into the thread cassette?
- 8Why does the lower thread keep breaking?
- 9Fabric and Thread
- 10How do I manually thread the needle?
- 11Upper Threading (Using the twin needle)
- 12How do I thread the needle?
- 13How to I attach the spool of thread to my machine?
- 14"Delete the selected pattern." appears on the LCD.
- 15Embroidery
- 16"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 17"Data volume is too large for this pattern." message appearing on the LCD. What does it mean?
- 18"Insert thread cassette." message appearing on the LCD. What does it mean?
- 19How do I clean the race?
- 20Why does the needle keep breaking?
- 21The thread is looping when I try to wind a bobbin.
- 22My auto threader is not working. What should I do?
- 23"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 24"Press needle position button to raise needle." appears on the LCD.
- 25"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 26"Finish editing the pattern before sewing the pattern." message appearing on the LCD. What does it mean?
- 27"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 28"Change to the single needle mode." appears on the LCD.
- 29"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 30"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 31Why does my thread keep jamming?
- 32How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 33Incorrect thread tension
- 34Where do I put the oil in my machine?
- 35"Lower the presser foot lever." appears on the LCD.
- 36When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 37"Saved on another embroidery card." appears on the LCD.
- 38"Saved on an embroidery card." appears on the LCD.
- 39"Turn off the power and insert an embroidery card." appears on the LCD.
- 40"Calculating the time required... Please wait." appears on the LCD.
- 41"Saving..." message appearing on the LCD. What does it mean?
- 42"This embroidery pattern can not be used on this machine." appears on the LCD.
- 43"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 44"No more stitches can be combined." appears on the LCD.
- 45"Selected a pattern." appears on the LCD.
- 46"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 47"Twin needles can not be used for this pattern." appears on the LCD.
- 48"Lower the buttonhole lever." appears on the LCD.
- 49"Lift the buttonhole lever." appears on the LCD.
- 50"Disconnect the foot control." appears on the LCD.