FAQs & Troubleshooting
Popular |
HE-120
65 Results
1.
Where do I put the oil in my machine?
2.
When thread got tangled.
3.
"Lower the presser foot lever." appears on the LCD.
4.
How do I clean the race?
5.
How do I create a space between characters?
6.
How do I thread the needle?
7.
"Data volume is too large for this pattern." message appearing on the LCD. What does it mean?
8.
"Lift the buttonhole lever." appears on the LCD.
9.
"Selected a pattern." appears on the LCD.
10.
"Finish editing the pattern before sewing the pattern." message appearing on the LCD. What does it mean?
11.
Why does the lower thread keep breaking?
12.
Upper Threading (Using the twin needle)
13.
How do I load the spool into the thread cassette?
14.
It is difficult to pass the thread through the needle bar thread guide(hook).
15.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
16.
"This embroidery pattern can not be used on this machine." appears on the LCD.
17.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
18.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
19.
How do I sew buttonholes?
20.
How do I sew such as vinyl, leather, quilting layers and velvet?
21.
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
22.
"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
23.
"Delete the selected pattern." appears on the LCD.
24.
Why does the upper thread keep breaking?
25.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
26.
How do I correctly install a bobbin?
27.
Incorrect thread tension
28.
How do I manually thread the needle?
29.
When should I use the extra spool pin?
30.
How to I attach the spool of thread to my machine?