FAQs & Troubleshooting
Popular |
300 Results
- 1About Blade Extension, Cutting Pressure and Mat
- 2Mat and Material Combinations
- 3Mat and Cutting Blade Combinations
- 4List of Error Messages for CanvasWorkspace (Others)
- 5List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 6Can I create the cutting data for ScanNCut from the image data?
- 7The mat is fed in at an angle and is not fed during cutting / drawing.
- 8Attaching & Peeling Off the Material
- 9List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 10ErrS12 appears on the computer screen.
- 11What should I do if the scanned and cut positions are misaligned?
- 12I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 13The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 14Preparation of Craft Paper / Fabric
- 15“The entered text cannot be used.“ appears on the computer screen.
- 16ErrS06 appears on the computer screen.
- 17ErrS01 appears on the computer screen.
- 18E92002 appears on the computer screen.
- 19Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 20What type of data can my ScanNCut machine be used?
- 21Adjusting the Blade Extension
- 22ErrS99 appears on the computer screen.
- 23ErrS23 appears on the computer screen.
- 24ErrS07 appears on the computer screen.
- 25When I created a cutting data scanning my illustration, some areas were not converted to the cutting lines.
- 26Replacing the Blade
- 27There are deep cuts completely through the mat.
- 28Can I create the cutting data for ScanNCut from vector graphics data?
- 29E11010 appears on the computer screen.
- 30ErrS09 appears on the computer screen.
- 31ErrS03 appears on the computer screen.
- 32E12004 appears on the computer screen.
- 33How to Activate a Pattern Collection on CanvasWorkspace for PC [Video]
- 34E94005 appears on the computer screen.
- 35E94001 appears on the computer screen.
- 36E10003 appears on the computer screen.
- 37E00010 appears on the computer screen.
- 38"Please register your machine." appears on the computer screen.
- 39How to Install and Uninstall the Holder
- 40The Calligraphy Font in the USB Flash Drive is Not Displayed
- 41How to Save Patterns in the Computer
- 42I find some scratches outside the grid area (the attaching area) on the mat. Why is such a scratch attached on the mat?
- 43The 12" × 24" (305 mm × 610 mm) mat cannot be used with scanning function.
- 44Scanning a Background Image (Background Scanning).
- 45What is the difference between "CWPRJ" file and "FCM" file? [Video]
- 46How to Create an Offset Line [Video]
- 47Enhanced Image Tracing function Activation on CanvasWorkspace(Web). [Video]
- 48How to register Your Machine with CanvasWorkspace
- 49How do I Create the Cutting Data (Scan to Cut Data) ?
- 50ErrS90 appears on the computer screen.