FAQs & Troubleshooting
Popular |
94 Results
- 1How to use the Round frame (PRPRFK1) [Video instructions]
- 2How to set up the cap frame. [Video instructions]
- 3How to Embroider on Pet Collar. [Video instructions]
- 4How to Embroider on Cap. [Video instructions]
- 5How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 6"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 7How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 8How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 9How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 10How to Embroider on Shoes. [Video instructions]
- 11"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 12"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 13"Please go to either Embroidering Screen or Embroidering Settings Screen to use the Thread Trimmer." message appears on the LCD. What does it mean?
- 14"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 15Maintenance (Oiling the machine) [ Video ]
- 16Maintenance (Cleaning the bobbin case) [ Video ]
- 17Maintenance (Cleaning the thread paths of the upper threads)
- 18When thread got tangled
- 19"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
- 20There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 21"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 22"Trimming sensor error." message appears on the LCD. What does it mean?
- 23"OK to cancel embroidering?" message appears on the LCD. What does it mean?
- 24Maintenance (Cleaning the bobbin case)
- 25How do I thread the machine? (Threading the upper thread)
- 26"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 27"This pattern cannot be used." message appears on the LCD. What does it mean?
- 28"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 29Maintenance (Oiling the machine)
- 30Maintenance (Clean the hook)
- 31"Needle threader is in threading position." message appears on the LCD. What does it mean?
- 32Hooping the Fabric
- 33"USB media error" message appears on the LCD. What does it mean?
- 34How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 35How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 36How to use the the versatile magnetic frame [Video instructions]
- 37How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 38"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 39"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 40"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 41"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 42"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 43"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 44"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 45"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 46"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 47"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 48"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 49"This USB media cannot be used." message appears on the LCD. What does it mean?
- 50"This pattern cannot combine." message appears on the LCD. What does it mean?