FAQs & Troubleshooting
Popular |
PR1000e
94 Results
1.
How to set up the cap frame. [Video instructions]
2.
How to Embroider on Cap. [Video instructions]
3.
How to Embroider on Pet Collar. [Video instructions]
4.
How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
5.
How to use the Round frame (PRPRFK1) [Video instructions]
6.
How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
7.
How to use the the versatile magnetic frame [Video instructions]
8.
How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
9.
How to Embroider on Shoes. [Video instructions]
10.
Maintenance (Oiling the machine) [ Video ]
11.
Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
12.
Maintenance (Cleaning the bobbin case) [ Video ]
13.
"This pattern cannot be used." message appears on the LCD. What does it mean?
14.
How to Embroider on Bag. [Video instructions]
15.
When thread got tangled
16.
"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
17.
Maintenance (Clean the hook) [ Video ]
18.
"Please go to either Embroidering Screen or Embroidering Settings Screen to use the Thread Trimmer." message appears on the LCD. What does it mean?
19.
How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
20.
How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
21.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
22.
"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
23.
How to set up the cap frame driver. [Video instructions]
24.
How to Embroider on Clothes. [Video instructions]
25.
Maintenance (Oiling the machine)
26.
"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
27.
"Inappropriate needle stop position" message appears on the LCD. What does it mean?
28.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
29.
"Trimming sensor error." message appears on the LCD. What does it mean?
30.
"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?