MFC-9130CW
FAQs & Troubleshooting |
40 Results
Sort by:
- 112/04/2023Toner Low
- 212/19/2022I just replaced the toner cartridge and the LCD continues to display the message "Toner Life End" or "Replace Toner".
- 307/12/2022I keep getting the error message "Authenticate Err (Authentication error)".
- 409/30/2021I still receive the error message "Replace DrumX" or "Drum End SoonX" after I replace the drum unit with a new one.
- 507/10/2019Replace Drum
- 602/05/2019The LCD displays an error code when I use Web icon (Brother Web Connect).
- 712/12/2018Cover is Open
- 806/29/2018No Waste Toner
- 906/29/2018Short Paper
- 1006/29/2018No Belt Unit
- 1102/24/2017Calibrate or Calibration Failed or Calibration.
- 1203/25/2016Scan Unable xx
- 1306/22/2015Cartridge Error
- 1409/19/2014Print Unable XX
- 1509/19/2014Replace Fuser
- 1609/16/2014Registration or Registration failed.
- 1705/01/2014Replace PF Kit xx
- 1802/20/2014Toner Error
- 1911/21/2013Fuser Error or Self-Diagnostic
- 2003/27/2013When I send a fax from the machine, an error "not register." or "not registered." is displayed.
- 2103/12/2013Manual Feed
- 2202/27/2013Size mismatch
- 2302/14/2013Jam Manual Feed
- 2402/14/2013No Toner
- 2502/14/2013No Paper
- 2602/14/2013Document Jam
- 2702/14/2013Out of Memory
- 2802/14/2013Replace Belt
- 2901/29/2013Replace WT (waste toner) Box
- 3001/29/2013Jam Rear
- 3101/29/2013Jam Inside
- 3201/29/2013Jam Tray 1 or Jam Tray
- 3301/29/2013Replace Toner
- 3411/12/2012Log Access Error
- 3511/12/2012Drums End Soon/ Drum End Soon(X)
- 3611/02/2012Drum Error (Drum!)
- 3710/25/2012Small Paper
- 3807/06/2010Belt End Soon
- 3907/06/2010WT Box End Soon
- 4007/06/2010Drum Stop