FAQs & Troubleshooting
 |
Popular |
33 Results
- 1How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 2How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 3How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 4How to use the Blind Stitch Foot. (Optional accessory : X76590-002) [Video instructions]
- 5How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 6Threading the lower looper
- 7THREADING
- 8How to attach and remove the presser foot
- 9If threads break during sewing
- 10To secure chain
- 11Skipped stitches
- 12Needles break
- 13How to use the thread spool cap
- 14Adjusting the presser foot pressure
- 15How to set the thread change assembly (Two-thread sewing)
- 16Differential feed adjustment
- 17Using the wide table
- 18How to remove and install the needle
- 19Needle
- 20Oiling
- 21Cleaning
- 22Retracting knife
- 23Free-arm sewing (removing bed extension)
- 24Sewing Materials, Threads and Needles Comparison Chart
- 25Fabric is puckered
- 26Stitches are not uniform
- 27Threads break
- 28The fabric does not feed through.
- 29Threading the left needle
- 30Threading the right needle
- 31Threading the upper looper
- 32Preparation before threading
- 33Adjusting the thread tension dials
