FAQs & Troubleshooting
![]() |
Popular |
55 Results
- 1Combination of fabric, thread and needle
- 2Fabric and Thread
- 3Why does the lower thread keep breaking?
- 4When thread got tangled.
- 5Embroidery
- 6UPPER THREADING
- 7How do I remove the presser foot holder?
- 8When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 9How do I create a space between characters?
- 10Place a spool of thread on a spool pin.
- 11It is difficult to pass the thread through the needle bar thread guide(hook).
- 12Where do I put the oil in my machine?
- 13"Turn off power and remove embroidery unit before using this button." message appearing on the LCD. What does it mean?
- 14Why is the outline sewing off the pattern?
- 15When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 16"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 17How do I sew a blind hem?
- 18Fabrics and stabilizer material for embroidery
- 19"Embroidery arm will start moving. Keep your hands, etc. away from arm." message appearing on the LCD. What does it mean?
- 20"Raise buttonhole lever(1)." message appearing on the LCD. What does it mean?
- 21"Complete pattern entry." message appearing on the LCD. What does it mean?
- 22Why does the upper thread keep breaking?
- 23How do I sew such as vinyl, leather, quilting layers and velvet?
- 24How do I correctly install a bobbin?
- 25"Selected embroidery pattern exceeds size of large frame." message appearing on the LCD. What does it mean?
- 26"Saved on another card." message appearing on the LCD. What does it mean?
- 27"Saved on a card." message appearing on the LCD. What does it mean?
- 28"This button will not work while embroidery unit is attached." message appearing on the LCD. What does it mean?
- 29"Start/Stop button does not work when foot control is connected. Disconnect foot control." message appearing on the LCD. What does it mean?
- 30"Check if thread is entangled. Check if needle is bent." message appearing on the LCD. What does it mean?
- 31"Check if upper or lower thread is cut." message appearing on the LCD. What does it mean and how do I clear it?
- 32"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 33Why does the needle keep breaking?
- 34How do I sew buttonholes?
- 35"Card is not inserted. Turn off power and insert card." message appearing on the LCD. What does it mean?
- 36"Lower buttonhole lever(1)." message appearing on the LCD. What does it mean?
- 37"Select pattern." message appearing on the LCD. What does it mean?
- 38"Lower the presser foot lever." appears on the LCD.
- 39"Return bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 40How do I sew an applique?
- 41How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 42How do I wind the bobbin?
- 43"Pattern is too big for large frame. To add more patterns, rotate this pattern." message appearing on the LCD. What does it mean?
- 44"This button will not work when embroidery unit is not attached. Turn off power and attach embroidery unit." message appearing on the LCD. What does it mean?
- 45"No pattern is memorized." message appearing on the LCD. What does it mean?
- 46"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 47"Raise the needle to high position." message appearing on the LCD. What does it mean?
- 48"This key does not work when needle is at low position. Raise the needle to high position and touch key again." message appearing on the LCD. What does it mean and how do I clear it?
- 49The thread tension is incorrect.
- 50"Foot controller will not work while embroidery unit is attached. Remove foot controller." message appearing on the LCD. What does it mean?