FAQs & Troubleshooting
Popular |
PC-6500
55 Results
1.
Combination of fabric, thread and needle
2.
Fabric and Thread
3.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
4.
Where do I put the oil in my machine?
5.
How do I create a space between characters?
6.
How do I remove the presser foot holder?
7.
Why does the lower thread keep breaking?
8.
When thread got tangled.
9.
How do I wind the bobbin?
10.
UPPER THREADING
11.
Embroidery
12.
Place a spool of thread on a spool pin.
13.
It is difficult to pass the thread through the needle bar thread guide(hook).
14.
"Saved on a card." message appearing on the LCD. What does it mean?
15.
"Selected embroidery pattern exceeds size of large frame." message appearing on the LCD. What does it mean?
16.
"Turn off power and remove embroidery unit before using this button." message appearing on the LCD. What does it mean?
17.
"Saving" message appearing on the LCD. What does it mean?
18.
"Return bobbin winding shaft to left." message appearing on the LCD. What does it mean?
19.
Fabrics and stabilizer material for embroidery
20.
"Start/Stop button does not work when foot control is connected. Disconnect foot control." message appearing on the LCD. What does it mean?
21.
"Check if upper or lower thread is cut." message appearing on the LCD. What does it mean and how do I clear it?
22.
"Select pattern." message appearing on the LCD. What does it mean?
23.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
24.
"Raise the needle to high position." message appearing on the LCD. What does it mean?
25.
Why does the upper thread keep breaking?
26.
Why does the needle keep breaking?
27.
"Embroidery arm will start moving. Keep your hands, etc. away from arm." message appearing on the LCD. What does it mean?
28.
"Card is not inserted. Turn off power and insert card." message appearing on the LCD. What does it mean?
29.
"Foot controller will not work while embroidery unit is attached. Remove foot controller." message appearing on the LCD. What does it mean?
30.
"This button will not work when embroidery unit is not attached. Turn off power and attach embroidery unit." message appearing on the LCD. What does it mean?