FAQs & Troubleshooting
![]() |
Popular |
328 Results
- 1N10004 appears on the computer screen.
- 2List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 3How do I Create the Cutting Data (Scan to Cut Data) ?
- 4What is the Difference between "Pen Holder", "Universal Pen Holder" and "Small Barrel Pan Holder"?
- 5Downloading Optional Design Pattern Collection
- 6E11005 appears on the computer screen.
- 7About CanvasWorkspace
- 8Mat and Cutting Blade Combinations
- 9E92001 appears on the computer screen.
- 10How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 11List of Error Messages for CanvasWorkspace (Others)
- 12How to Save Patterns in the Computer
- 13How do I Scan for Cutting (Direct Cut) ?
- 14How to register Your Machine with CanvasWorkspace
- 15Mat and Material Combinations
- 16If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 17Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 18Can I create the cutting data for ScanNCut from vector graphics data?
- 19List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 20ErrS99 appears on the computer screen.
- 21ErrS51 appears on the computer screen.
- 22ErrS06 appears on the computer screen.
- 23E00011 appears on the computer screen.
- 24How can I transfer the created/edited data between CanvasWorkspace and my machine via a wireless network?
- 25The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 26The mat or the material catches on a feed roller during cutting/drawing.
- 27ErrS08 appears on the computer screen.
- 28How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]
- 29E00006 appears on the computer screen.
- 30E00003 appears on the computer screen.
- 31How to use Enhanced Image Tracing function. [Video]
- 32About Blade Extension, Cutting Pressure and Mat
- 33The Calligraphy Font in the USB Flash Drive is Not Displayed
- 34What should I do if the scanned and cut positions are misaligned?
- 35I find some scratches outside the grid area (the attaching area) on the mat. Why is such a scratch attached on the mat?
- 36How do I Edit Pictures ? (Adjusting Image Detection Levels)
- 37The mat or the material catches on a feed roller when the mat is being inserted.
- 38Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
- 39What should I do if the adjustment of the embossing template position failed?
- 40"Patterns cannot be welded. There are some patterns which cannot accept or no overlaps." message appearing on the LCD. What does it mean?
- 41Loading and Unloading the Mat
- 42ErrS90 appears on the computer screen.
- 43ErrS52 appears on the computer screen.
- 44ErrS25 appears on the computer screen.
- 45ErrS24 appears on the computer screen.
- 46ErrS23 appears on the computer screen.
- 47ErrS09 appears on the computer screen.
- 48ErrS02 appears on the computer screen.
- 49ErrS01 appears on the computer screen.
- 50E12003 appears on the computer screen.