FAQs & Troubleshooting
 |
Popular |
325 Results
- 1Replacing the Blade
- 2E00002 appears on the computer screen.
- 3About Blade Extension, Cutting Pressure and Mat
- 4The mat is fed in at an angle and is not fed during cutting / drawing.
- 5Downloading Optional Design Pattern Collection
- 6What should I do if the scanned and cut positions are misaligned?
- 7List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 8Care and Maintenance (Cleaning the Mat)
- 9The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 10The mat or the material catches on a feed roller during cutting/drawing.
- 11How to register Your Machine with CanvasWorkspace
- 12The mat cannot be fed out.
- 13How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 14ErrS02 appears on the computer screen.
- 15If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 16Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 17Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 18"Connection Fail : Err-02" appears on the LCD Display Screen. What does it mean?
- 19What type of data can my ScanNCut machine be used?
- 20What file format can be used in CanvasWorkspace?
- 21How to attach the material to the mat
- 22Mat and Cutting Blade Combinations
- 23List of Error Messages for CanvasWorkspace (Others)
- 24Can different types of material be attached to the same mat for cutting?
- 25N12001 appears on the computer screen.
- 26E94005 appears on the computer screen.
- 27E94002 appears on the computer screen.
- 28E10003 appears on the computer screen.
- 29E00009 appears on the computer screen.
- 30E00008 appears on the computer screen.
- 31List of Error Messages for CanvasWorkspace (E##### / N#####)
- 32Cutting/Drawing by Tracing an Image
- 33E00001 appears on the computer screen.
- 34An error appears when trying to import a DXF file.
- 35Important Notice for using the Foil Transfer Starter Kit
- 36How can I transfer the created/edited data between CanvasWorkspace and my machine via a wireless network?
- 37How to find the SSID (Network Name) and Network Key (Password)
- 38How do I Scan for Cutting (Direct Cut) ?
- 39The machine is turned off (Auto Shut Down).
- 40How to Calibrate the LCD Touchscreen Display
- 41Care and Maintenance (Cleaning the Holder)
- 42Adjusting the Blade Extension
- 43The mat or the material catches on a feed roller when the mat is being inserted.
- 44Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
- 45I cannot log in even after entering my login ID and password for CanvasWorkspace.
- 46I registered with CanvasWorkspace, but the email did not arrive.
- 47How to connect my machine to a wireless network using the Setup Wizard
- 48Can I purchase the Brother Cutting Machine from abroad?
- 49"The data cannot be read." message appearing on the LCD. What does it mean?
- 50How do I Edit Pictures ? (Adjusting Image Detection Levels)
