FAQs & Troubleshooting
![]() |
Popular |
325 Results
- 1Mat and Cutting Blade Combinations
- 2About Blade Extension, Cutting Pressure and Mat
- 3List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 4Mat and Material Combinations
- 5Adjusting the Blade Extension
- 6Downloading Optional Design Pattern Collection
- 7List of Error Messages for CanvasWorkspace (Others)
- 8How to Install and Uninstall the Holder
- 9The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 10List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 11The mat is fed in at an angle and is not fed during cutting / drawing.
- 12How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 13Can I create the cutting data for ScanNCut from the image data?
- 14How to register Your Machine with CanvasWorkspace
- 15The mat or the material catches on a feed roller during cutting/drawing.
- 16Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
- 17Can I create the cutting data for ScanNCut from vector graphics data?
- 18If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 19How can I transfer the created/edited data between CanvasWorkspace and my machine via a wireless network?
- 20How to connect my machine to a wireless network using the Setup Wizard
- 21What type of data can my ScanNCut machine be used?
- 22E11010 appears on the computer screen.
- 23Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 24"Connection Fail : Err-05" appears on the LCD Display Screen. What does it mean?
- 25List of Error Messages
- 26Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 27What should I do if the scanned and cut positions are misaligned?
- 28ErrS06 appears on the computer screen.
- 29What type of cut files and projects containing cut data other than built-in patterns are available?
- 30Important Notice for using the Foil Transfer Starter Kit
- 31The Calligraphy Font in the USB Flash Drive is Not Displayed
- 32How to Recall from the Computer
- 33E10005 appears on the computer screen.
- 34E10004 appears on the computer screen.
- 35How long will the mat last?
- 36How to Calibrate the LCD Touchscreen Display
- 37“The entered text cannot be used.“ appears on the computer screen.
- 38ErrS10 appears on the computer screen.
- 39E10003 appears on the computer screen.
- 40How do I Scan for Cutting (Direct Cut) ?
- 41Replacing the Blade
- 42E99901 appears on the computer screen.
- 43E01006 appears on the computer screen.
- 44"Please register your machine." appears on the computer screen.
- 45I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 46I find some scratches outside the grid area (the attaching area) on the mat. Why is such a scratch attached on the mat?
- 47Scanning a Background Image (Background Scanning).
- 48Care and Maintenance (Cleaning the Mat)
- 49How to attach the material to the mat
- 50ErrS52 appears on the computer screen.