FAQs & Troubleshooting
Popular |
CM350
325 Results
1.
Mat and Cutting Blade Combinations
2.
About Blade Extension, Cutting Pressure and Mat
3.
Mat and Material Combinations
4.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
5.
Downloading Optional Design Pattern Collection
6.
List of Error Messages for CanvasWorkspace (Others)
7.
Adjusting the Blade Extension
8.
How to Install and Uninstall the Holder
9.
Can I create the cutting data for ScanNCut from vector graphics data?
10.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
11.
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
12.
How to register Your Machine with CanvasWorkspace
13.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
14.
Can I create the cutting data for ScanNCut from the image data?
15.
What should I do if the scanned and cut positions are misaligned?
16.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
17.
Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
18.
Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
19.
List of Error Messages
20.
How do I Scan for Cutting (Direct Cut) ?
21.
How to create an account for CanvasWorkspace
22.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
23.
How can I transfer the created/edited data between CanvasWorkspace and my machine via a wireless network?
24.
When I created a cutting data scanning my illustration, some areas were not converted to the cutting lines.
25.
What type of data can my ScanNCut machine be used?
26.
ErrS01 appears on the computer screen.
27.
FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
28.
How to find the SSID (Network Name) and Network Key (Password)
29.
The machine is turned off (Auto Shut Down).
30.
There are deep cuts completely through the mat.