FAQs & Troubleshooting
 |
Popular |
299 Results
- 1Mat and Cutting Blade Combinations
- 2The mat or the material catches on a feed roller during cutting/drawing.
- 3How to create an account for CanvasWorkspace
- 4Mat and Material Combinations
- 5About Blade Extension, Cutting Pressure and Mat
- 6List of Error Messages for CanvasWorkspace (Others)
- 7List of Error Messages for CanvasWorkspace (E##### / N#####)
- 8Can I create the cutting data for ScanNCut from the image data?
- 9Downloading Optional Design Pattern Collection
- 10Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 11Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 12What type of data can my ScanNCut machine be used?
- 13Preparation of Craft Paper / Fabric
- 14"The data cannot be saved." message appearing on the LCD. What does it mean?
- 15Care and Maintenance (Cleaning the Mat)
- 16Attaching & Peeling Off the Material
- 17How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 18ErrS99 appears on the computer screen.
- 19E00011 appears on the computer screen.
- 20How to trace the inside edge of the image on Enhanced Image Tracing function. [Video]
- 21Can I create the cutting data for ScanNCut from vector graphics data?
- 22I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 23How to register Your Machine with CanvasWorkspace
- 24ErrS52 appears on the computer screen.
- 25E12003 appears on the computer screen.
- 26How to Use the Layer Panel [Video]
- 27Can multiple sheets of material be overlapped and attached to the mat?
- 28What should I do if I change the size (enlarge/reduce) of the Disney Pattern downloaded?
- 29How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]
- 30E11002 appears on the computer screen.
- 31E10004 appears on the computer screen.
- 32E11001 appears on the computer screen.
- 33E00001 appears on the computer screen.
- 34Important Information about Mat
- 35How to make Quilt.(using High tack adhesive fabric support sheet)[Video]
- 36How do I Scan for Cutting (Direct Cut) ?
- 37How to Calibrate the LCD Touchscreen Display
- 38Replacing the Blade
- 39Adjusting the Blade Extension
- 40The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 41The mat is fed in at an angle and is not fed during cutting / drawing.
- 42The mat cannot be recognized.
- 43Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
- 44Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 45What should I do if the scanned and cut positions are misaligned?
- 46What should I do if the adjustment of the embossing template position failed?
- 47How do I Create the Cutting Data (Scan to Cut Data) ?
- 48Scanning Images (Scan to USB)
- 49Care and Maintenance (Cleaning the Scanner Glass)
- 50Care and Maintenance (Cleaning the Holder)
