FAQs & Troubleshooting
 |
Popular |
94 Results
- 1How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 2How to use the Round frame (PRPRFK1) [Video instructions]
- 3How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 4How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 5How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 6How to use the the versatile magnetic frame [Video instructions]
- 7How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 8How to Embroider on Bag. [Video instructions]
- 9How to Embroider on Clothes. [Video instructions]
- 10How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 11How to Embroider on Cap. [Video instructions]
- 12How to Embroider on Pet Collar. [Video instructions]
- 13Maintenance (Cleaning the bobbin case) [ Video ]
- 14Maintenance (Clean the hook) [ Video ]
- 15How to set up the cap frame driver. [Video instructions]
- 16"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 17How to set up the cap frame. [Video instructions]
- 18Maintenance (Oiling the machine) [ Video ]
- 19Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 20Maintenance (Cleaning around the needle plate) [ Video ]
- 21There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 22How to Embroider on Shoes. [Video instructions]
- 23"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 24"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 25"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 26"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean?
- 27"This pattern cannot combine." message appears on the LCD. What does it mean?
- 28How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 29"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 30"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 31"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 32"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 33"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
- 34"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 35"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 36"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 37"Needle threader is in threading position." message appears on the LCD. What does it mean?
- 38"Picker error" message appears on the LCD. What does it mean?
- 39"Needle case motor has been locked." message appears on the LCD. What does it mean?
- 40"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 41"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 42"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 43"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 44Maintenance (Oiling the machine)
- 45"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 46"Please go to either Embroidering Screen or Embroidering Settings Screen to use the Thread Trimmer." message appears on the LCD. What does it mean?
- 47"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 48"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 49"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 50"This pattern cannot be used." message appears on the LCD. What does it mean?
