FAQs & Troubleshooting
Popular |
94 Results
- 1How to set up the cap frame. [Video instructions]
- 2Color thread table
- 3How to Embroider on Cap. [Video instructions]
- 4How to Embroider on Shoes. [Video instructions]
- 5How to Embroider on Bag. [Video instructions]
- 6How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 7Embroidery pattern does not sew out correctly.
- 8How to Embroider on Pet Collar. [Video instructions]
- 9How to set up the cap frame driver. [Video instructions]
- 10Maintenance (Cleaning the thread paths of the upper threads)
- 11How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 12Creating Beautiful Embroidery (Threads)
- 13How do I adjust the tension of the bobbin thread ?
- 14What is DST ?
- 15"Trimming sensor error." message appears on the LCD. What does it mean?
- 16How do I attach or remove the embroidery frame ?
- 17Colors of Tajima (.dst) embroidery data
- 18"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?
- 19How do I use the embroidery sheet ?
- 20Maintenance (Oiling the machine)
- 21Why does the upper thread keep breaking?
- 22When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 23How do I thread the machine? (Threading the upper thread)
- 24"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 25The thread tension is incorrect.
- 26"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 27"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 28"Check upper and bobbin thread." message appears on the LCD. What does it mean and how do I clear it?
- 29How do I adjust the tension of the upper thread ?
- 30Maintenance (Cleaning around the needle plate)
- 31Loops appear on the surface of the fabric when embroidering.
- 32How do I change the needle?
- 33Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 34Maintenance (Clean the hook)
- 35"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 36How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 37How do I install the bobbin wound with thread?
- 38How do I resume embroidering after turning off the machine ?
- 39How do I wind the bobbin?
- 40Fabric/stabilizer compatibility chart
- 41"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 42How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 43Creating Beautiful Embroidery ( Hooping techniques )
- 44Why does the needle keep breaking?
- 45Stabilizers (Backing)
- 46"This pattern cannot combine." message appears on the LCD. What does it mean?
- 47Maintenance (Cleaning the bobbin case)
- 48The machine is noisy while embroidering.
- 49How do I embroider on small pieces of fabric ?
- 50LED pointer does not indicate the position correctly.