FAQs & Troubleshooting
Popular |
PRS100
94 Results
1.
Color thread table
2.
How to set up the cap frame. [Video instructions]
3.
How to Embroider on Bag. [Video instructions]
4.
Embroidery pattern does not sew out correctly.
5.
How to Embroider on Cap. [Video instructions]
6.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
7.
How to set up the cap frame driver. [Video instructions]
8.
How to Embroider on Pet Collar. [Video instructions]
9.
How to Embroider on Shoes. [Video instructions]
10.
How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
11.
Maintenance (Cleaning the thread paths of the upper threads)
12.
How do I use the embroidery sheet ?
13.
Maintenance (Oiling the machine)
14.
"Check upper and bobbin thread." message appears on the LCD. What does it mean and how do I clear it?
15.
"Trimming sensor error." message appears on the LCD. What does it mean?
16.
How do I adjust the tension of the upper thread ?
17.
Why does the upper thread keep breaking?
18.
How do I thread the machine? (Threading the upper thread)
19.
How do I attach or remove the embroidery frame ?
20.
What is DST ?
21.
How do I adjust the tension of the bobbin thread ?
22.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
23.
The thread tension is incorrect.
24.
"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
25.
Creating Beautiful Embroidery (Threads)
26.
Colors of Tajima (.dst) embroidery data
27.
Maintenance (Cleaning the bobbin case)
28.
"Preventive maintenance is recommended" appears on the LCD.
29.
"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
30.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?