Innov-is 500D
![]() |
Preguntas frecuentes y solución de problemas |
30 Resultados
Agrupar por
- 103/31/2016"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 203/31/2016"Saving..." message appearing on the LCD. What does it mean?
- 303/31/2016"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 403/31/2016"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 503/31/2016"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 603/31/2016"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 703/31/2016"Finish editing the pattern before sewing the pattern." message appearing on the LCD. What does it mean?
- 803/31/2016"Data volume is too large for this pattern." message appearing on the LCD. What does it mean?
- 903/31/2016"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 1003/31/2016"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 1103/31/2016"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 1203/31/2016"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 1305/14/2015"Selected a pattern." appears on the LCD.
- 1405/14/2015"Twin needles can not be used for this pattern." appears on the LCD.
- 1505/14/2015"Change to the single needle mode." appears on the LCD.
- 1604/07/2009"Lower the presser foot lever." appears on the LCD.
- 1704/07/2009"Lower the buttonhole lever." appears on the LCD.
- 1804/07/2009"Lift the buttonhole lever." appears on the LCD.
- 1904/07/2009"The safety device has been activated." appears on the LCD.
- 2002/26/2009"Disconnect the foot control." appears on the LCD.
- 2104/01/2008"Saved on another embroidery card." appears on the LCD.
- 2204/01/2008"Saved on an embroidery card." appears on the LCD.
- 2304/01/2008"Turn off the power and insert an embroidery card." appears on the LCD.
- 2404/01/2008"Calculating the time required... Please wait." appears on the LCD.
- 2503/31/2008"This embroidery pattern can not be used on this machine." appears on the LCD.
- 2603/31/2008"No more stitches can be combined." appears on the LCD.
- 2703/31/2008"Delete the selected pattern." appears on the LCD.
- 2803/31/2008"Press the back key to return to the screen to sew." appears on the LCD.
- 2911/13/2007"Press needle position button to raise needle." appears on the LCD.
- 3008/03/2006"Insert thread cassette." message appearing on the LCD. What does it mean?