Innov-is NQ3500D
![]() |
FAQs & Troubleshooting |
33 Results
Sort by
- 125/01/2023"USB media error" message appears on the LCD. What does it mean?
- 221/07/2017"F**" appears on the LCD. What does it mean?
- 321/07/2017"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 428/02/2017"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 528/02/2017"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 628/02/2017"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 728/02/2017"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 828/02/2017"Turn off the power and replace the needle plate." appears on the LCD.
- 928/02/2017"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 1028/02/2017"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 1128/02/2017"Lower the buttonhole lever." message appears on the LCD. What does it mean and how do I clear it?
- 1228/02/2017"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 1328/02/2017"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 1429/07/2016"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 1529/07/2016"Not enough available memory to save." message appears on the LCD. What does it mean?
- 1629/07/2016"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 1729/07/2016"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 1829/07/2016"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 1929/07/2016"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 2029/07/2016"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 2129/07/2016"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 2229/07/2016"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 2329/07/2016"This USB media cannot be used." message appears on the LCD. What does it mean?
- 2429/07/2016"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 2529/07/2016"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?
- 2629/07/2016"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 2729/07/2016"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 2829/07/2016"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 2929/07/2016"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 3029/07/2016"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 3129/07/2016"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean and how do I clear it?
- 3229/07/2016"This pattern cannot be used." message appears on the LCD. What does it mean?
- 3312/11/2015"Preventive maintenance is recommended" appears on the LCD.