Innov-is NQ3500D
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inovnq3500deas.jpg)
Innov-is NQ3500D
Sort by
33 Results
1. 25/01/2023
"USB media error" message appears on the LCD. What does it mean?
2. 21/07/2017
"F**" appears on the LCD. What does it mean?
3. 21/07/2017
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
4. 28/02/2017
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
5. 28/02/2017
"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
6. 28/02/2017
"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
7. 28/02/2017
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
8. 28/02/2017
"Turn off the power and replace the needle plate." appears on the LCD.
9. 28/02/2017
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
10. 28/02/2017
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
11. 28/02/2017
"Lower the buttonhole lever." message appears on the LCD. What does it mean and how do I clear it?
12. 28/02/2017
"Raise the buttonhole lever." message appears on the LCD. What does it mean?
13. 28/02/2017
"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
14. 29/07/2016
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
15. 29/07/2016
"Not enough available memory to save." message appears on the LCD. What does it mean?
16. 29/07/2016
"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
17. 29/07/2016
"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
18. 29/07/2016
"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
19. 29/07/2016
"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
20. 29/07/2016
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
21. 29/07/2016
"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
22. 29/07/2016
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
23. 29/07/2016
"This USB media cannot be used." message appears on the LCD. What does it mean?
24. 29/07/2016
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
25. 29/07/2016
"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?
26. 29/07/2016
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
27. 29/07/2016
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
28. 29/07/2016
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
29. 29/07/2016
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
30. 29/07/2016
"Check and rethread the upper thread." message appears on the LCD. What does it mean?