FAQs & Troubleshooting
![]() |
Popular |
143 Results
- 1Basic operations and embroidery functions [Video instructions]
- 2How do I adjust thread tension for embroidering?
- 3How do I thread the machine (Threading the upper thread)?
- 4How do I adjust thread tension for embroidering?
- 5How do I sew with the twin needle?
- 6How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 7Various sewing and application [Video instructions]
- 8How do I clean the race?
- 9How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 10Upper thread breaks.
- 11The needle contacts the needle plate.
- 12Touch panel is malfunctioning.
- 13How do I change the needle ?
- 14How do I pull up the bobbin thread?
- 15Embroidery
- 16Tips for sewing thin fabrics
- 17Tips for sewing thick fabrics
- 18How to adjust the thread tension
- 19The stitch is not sewn correctly
- 20Basic procedure to sew stitches
- 21How do I hoop the fabric in the embroidery frame?
- 22Fabric is caught in the machine and cannot be removed
- 23How do I remove or attach the presser foot ?
- 24How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 25How do I wind the bobbin?
- 26Combination of fabric, thread and needle
- 27Machine does not start to sew.
- 28The fabric feeds in the opposite direction.
- 29"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." message appears on the LCD. What does it mean?
- 30Upper thread tightened up
- 31For better results when sewing stretch fabrics
- 32How do I attach or remove the embroidery frame ?
- 33How do I remove or attach the Embroidery foot ?
- 34How do I set the bobbin?
- 35"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 36How to change the needle stop position
- 37How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 38Outline of viewing and functions for keys on the utility stitch screen and the decorative stitch screen
- 39"This pattern cannot be loaded as the pattern extends out of the editable area." message appears on the LCD. What does it mean?
- 40How do I adjust a stitch width or length?
- 41How do I remove or attach the presser foot holder?
- 42When the thread became tangled under the bobbin winder seat
- 43How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 44"USB media error" message appears on the LCD. What does it mean?
- 45"Preventive maintenance is recommended." ppears on the LCD.
- 46"F07" appears on the LCD. What does it mean?
- 47Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 48Tangled thread on wrong side of fabric
- 49Incorrect thread tension
- 50"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." message appears on the LCD.