Innov-is NV180K

FAQs & Troubleshooting

FAQs & Troubleshooting

How to change the needle stop position

Changing the needle stop position

As a default, it is set to leave the needle lowered in the fabric when sewing is stopped. You can select the needle stop position (the needle position for when the machine is not being operated) to be up or down.

  1. Press img01 (Settings key) to display the settings screen.



  2. Display page 6 by pressing  img03 .


  3. Press img05 .


  4. Press [OK] key to return to the previous screen. Needle position setting indicator at the upper left of the LCD screen turns to the up position.




    Needle position setting indicator:

    It shows whether the needle is in the programmed raised or lowered position. In addition, it also shows whether the single needle mode or twin needle mode is selected.

    img09 : down position (single needle mode)   img10 : up position (single needle mode)
    img11 : down position (twin needle mode)   img12 : up position (twin needle mode)


If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is M380D, Innov-is NV180, Innov-is NV180D, Innov-is NV180K

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.