FAQs & Troubleshooting
Popular |
57 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2How do I adjust thread tension for embroidering?
- 3How do I select or display patterns according to the embroidery frame size?
- 4How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 5"This USB media cannot be used." message appears on the LCD. What does it mean?
- 6How do I edit a single letter in the embroidery pattern?
- 7How do I hoop the fabric in the embroidery frame?
- 8How do I save the embroidery patterns in the machine’s memory?
- 9How do I wind the bobbin?
- 10How do I thread the machine (Threading the upper thread)?
- 11Stitches are skipped
- 12"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 13When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 14How do I set the bobbin ?
- 15How do I adjust the sensitivity of the operation keys?
- 16"F**" appears on the LCD. What does it mean?
- 17"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 18Bobbin thread breaks
- 19"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 20How do I remove or attach the Embroidery foot ?
- 21"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 22"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 23Needle breaks.
- 24Fabric puckers
- 25"This pattern cannot be used." message appears on the LCD. What does it mean?
- 26Embroidery
- 27How to use the Multi-purpose Screwdriver.
- 28"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 29How do I remove or attach the presser foot ?
- 30"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 31"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 32How do I retrieve the patterns from the machine’s memory?
- 33How do I enter a line feed in the embroidery pattern?
- 34How do I change the font type in the embroidery pattern?
- 35When the thread became tangled under the bobbin winder seat
- 36Where do I put the oil in my machine?
- 37"USB media error" message appears on the LCD. What does it mean?
- 38"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 39"Preventive maintenance is recommended" appears on the LCD.
- 40"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 41"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 42How do I attach or remove the embroidery frame ?
- 43How do I change the needle ?
- 44"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 45"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?
- 46"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 47Upper thread breaks.
- 48"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 49"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 50How do I clean the race?