FAQs & Troubleshooting
Popular |
Innov-is NV800E
57 Results
1.
How to use the Multi-purpose Screwdriver.
2.
How do I adjust thread tension for embroidering?
3.
How do I hoop the fabric in the embroidery frame?
4.
How do I select or display patterns according to the embroidery frame size?
5.
How do I adjust the sensitivity of the operation keys?
6.
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
7.
"Preventive maintenance is recommended" appears on the LCD.
8.
Fabric puckers
9.
Stitches are skipped
10.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
11.
How do I retrieve the patterns from the machine’s memory?
12.
How do I save the embroidery patterns in the machine’s memory?
13.
Where do I put the oil in my machine?
14.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
15.
How do I remove or attach the presser foot ?
16.
"This USB media cannot be used." message appears on the LCD. What does it mean?
17.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
18.
"This pattern cannot be used." message appears on the LCD. What does it mean?
19.
How do I change the font type in the embroidery pattern?
20.
"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
21.
"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
22.
How do I remove or attach the Embroidery foot ?
23.
How do I attach or remove the Embroidery Unit?
24.
How do I thread the machine (Threading the upper thread)?
25.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
26.
Needle breaks.
27.
Bobbin thread breaks
28.
"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
29.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
30.
"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?