FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1Why does the needle keep breaking?
- 2How to set up the cap frame. [Video instructions]
- 3How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 4Loops appear on the surface of the fabric when embroidering.
- 5How to set up the cap frame driver. [Video instructions]
- 6The bobbin thread breaks.
- 7When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 8The thread tension is incorrect.
- 9How do I use the embroidery sheet ?
- 10How do I wind the bobbin?
- 11How to Embroider on Cap. [Video instructions]
- 12How to Embroider on Shoes. [Video instructions]
- 13"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean and how do I clear it?
- 14Creating Beautiful Embroidery (Threads)
- 15There is puckering in the fabric.
- 16"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 17"Check upper and bobbin thread." message appears on the LCD. What does it mean and how do I clear it?
- 18How do I resume embroidering after turning off the machine ?
- 19"Preventive maintenance is recommended" appears on the LCD.
- 20Bobbin thread does not wind neatly on the bobbin.
- 21"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 22"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 23How do I attach or remove the embroidery frame ?
- 24Maintenance (Cleaning the thread paths of the upper threads)
- 25Maintenance (Cleaning around the needle plate)
- 26"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean and how do I clear it?
- 27"Needle threader is in threading position." message appears on the LCD. What does it mean and how do I clear it?
- 28Embroidery pattern does not sew out correctly.
- 29"Trimming sensor error." message appears on the LCD. What does it mean?
- 30"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 31"Not enough available memory to save." message appears on the LCD. What does it mean?
- 32"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 33Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 34How do I change the needle?
- 35Creating Beautiful Embroidery ( Hooping techniques )
- 36What is DST ?
- 37How to Embroider on Pet Collar. [Video instructions]
- 38Maintenance (Oiling the machine)
- 39How do I install the bobbin wound with thread?
- 40Upper thread tightened up.
- 41There are needle cuts or holes in the garment.
- 42"This USB media cannot be used." message appears on the LCD. What does it mean?
- 43"This pattern cannot be used." message appears on the LCD. What does it mean?
- 44"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 45"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 46How do I embroider on large pieces of fabric or heavy clothing ?
- 47How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 48How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 49Maintenance (Cleaning the bobbin case)
- 50Maintenance (Clean the hook)