FAQs & Troubleshooting
Popular |
97 Results
- 1How do I select patterns from the embroidery cards (sold separately)?
- 2How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 3How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 4When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 5Why does the lower thread keep breaking?
- 6How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 7How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 8How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 9How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 10How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 11How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 12How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 13How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 14How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 15How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 16It is difficult to pass the thread through the needle bar thread guide(hook).
- 17"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 18When thread got tangled.
- 19"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 20"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 21"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 22Why does my thread keep jamming?
- 23F** or "F*" appears on the LCD. What does it mean?
- 24How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 25How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 26How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 27How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 28How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 29How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 30How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 31How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 32How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 33Where do I put the oil in my machine?
- 34How do I wind the bobbin?
- 35When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 36"Saving..." message appearing on the LCD. What does it mean?
- 37"Change to the single needle mode." appears on the LCD.
- 38"The safety device has been activated." appears on the LCD.
- 39How do I remove the presser foot holder?
- 40The thread tension is incorrect.
- 41The embroidery cover (the extension table) cannot put on the embroidery unit.
- 42Combination of fabric, thread and needle
- 43For better results when sewing stretch fabrics
- 44"Lower the presser foot lever." appears on the LCD.
- 45"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 46"Deleting..." message appearing on the LCD. What does it mean?
- 47"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 48"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 49"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 50"The bobbin thread is running out." message appearing on the LCD. What does it mean?