Innov-is 950

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 10/23/2015
  • ID: faqh00000014_000

Why does the lower thread keep breaking?

The lower thread could be breaking due to several reasons.
 

  • Check to see if the lower thread be tangled.

One Point Advice   When thread got tangled

  • The bobbin could be threaded improperly in the shuttle hook.
    Rethread the bobbin in the shuttle hook.

Please refer to "Installing a bobbin" of "Preparation" category.

 

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

AS1430S, AS2730S, BC-2100/BC-2100PRW, BC-2500, BM-3500/2600, BM-3600, CS-6000/6000b/6000t, CS-8060, DS-120, DS-140, FS101, GS2500, GS2700, GS2786K, GS3700, GS3740C, Innov-is 10, Innov-is 1000, Innov-is 1200, Innov-is 1250, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 15P, Innov-is 200/200QE, Innov-is 30, Innov-is 35P, Innov-is 400, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 50, Innov-is 500D, Innov-is 55P, Innov-is 600, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 95E, Innov-is 980D, Innov-is 980K, Innov-is 985D, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is V3, Innov-is V7, JA1450NT, JK17B, JS1410, JV1400, L14, LS-1217, LS-1520, LS-1717, LS-2125/2160, LX27NT, NX-200/200QE, NX-250, NX-400Q/400, NX-450, NX-600, PE-150V, PE-190D, PE-300S, PQ-1500/1500S, PQ1500SL, PS-53/55/57, PX-100/200/300, QC-1000, STAR 110/130E, STAR 230E/240E, SuperGalaxie 3000/3000C/3000D/3100D, XL-2120/2220/2230/2240, XL-2600/2620/2630, XL-5010/5020/5030, XL-5050/5060/5070, XL-5130/5232/5340, XL-5500, XL-5700, XL-6040/6050

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit