FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How do I resume embroidering after turning off the machine ?
- 2How to Embroider on Pet Collar. [Video instructions]
- 3Color thread table
- 4How to Embroider on Bag. [Video instructions]
- 5How to Embroider on Cap. [Video instructions]
- 6How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 7How to set up the cap frame driver. [Video instructions]
- 8How to Embroider on Shoes. [Video instructions]
- 9How do I use the embroidery sheet ?
- 10How to set up the cap frame. [Video instructions]
- 11How do I embroider on small pieces of fabric ?
- 12"Trimming sensor error." message appears on the LCD. What does it mean?
- 13How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 14The thread tension is incorrect.
- 15Loops appear on the surface of the fabric when embroidering.
- 16Why does the needle keep breaking?
- 17Colors of Tajima (.dst) embroidery data
- 18How do I thread the machine? (Threading the upper thread)
- 19When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 20"Preventive maintenance is recommended" appears on the LCD.
- 21Why does the upper thread keep breaking?
- 22Embroidery pattern does not sew out correctly.
- 23"This pattern cannot combine." message appears on the LCD. What does it mean?
- 24There is puckering in the fabric.
- 25How do I attach or remove the embroidery frame ?
- 26"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 27Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 28Creating Beautiful Embroidery ( Hooping techniques )
- 29Stabilizers (Backing)
- 30"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 31"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 32"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 33What is DST ?
- 34How do I wind the bobbin?
- 35Maintenance (Cleaning the thread paths of the upper threads)
- 36Stitches are skipped.
- 37The machine is noisy while embroidering.
- 38"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 39"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 40"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 41"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 42How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 43How do I embroider on large pieces of fabric or heavy clothing ?
- 44How do I adjust the tension of the bobbin thread ?
- 45Nothing happens, even if the LCD display is pressed.
- 46Although the thread is not broken, a broken thread error occurs and the machine stops.
- 47"OK to delete the selected pattern?" message appears on the LCD.What does it mean?
- 48"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 49"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 50"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?