FAQs & Troubleshooting
![]() |
Popular |
94 Results
1.
How do I resume embroidering after turning off the machine ?
2.
How to Embroider on Pet Collar. [Video instructions]
3.
Color thread table
4.
How to Embroider on Bag. [Video instructions]
5.
How to Embroider on Cap. [Video instructions]
6.
How do I attach Iron-On Stabilizer (Backing) to Fabric ?
7.
How to set up the cap frame driver. [Video instructions]
8.
How to Embroider on Shoes. [Video instructions]
9.
How do I use the embroidery sheet ?
10.
How to set up the cap frame. [Video instructions]
11.
How do I embroider on small pieces of fabric ?
12.
"Trimming sensor error." message appears on the LCD. What does it mean?
13.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
14.
The thread tension is incorrect.
15.
Loops appear on the surface of the fabric when embroidering.
16.
Why does the needle keep breaking?
17.
Colors of Tajima (.dst) embroidery data
18.
How do I thread the machine? (Threading the upper thread)
19.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
20.
"Preventive maintenance is recommended" appears on the LCD.
21.
Why does the upper thread keep breaking?
22.
Embroidery pattern does not sew out correctly.
23.
"This pattern cannot combine." message appears on the LCD. What does it mean?
24.
There is puckering in the fabric.
25.
How do I attach or remove the embroidery frame ?
26.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
27.
Embroidery Data Precautions (About the types of embroidery data that can be used.)
28.
Creating Beautiful Embroidery ( Hooping techniques )
29.
Stabilizers (Backing)
30.
"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?