Innov-is V5
![]() |
Vanliga frågor & felsökning |
43 Resultat
Sortera efter
- 12024-07-12"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 22024-07-12"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 32024-07-12"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 42019-07-09"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 52019-07-09"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 62019-07-09"Set the clock." message appears on the LCD. What does it mean?
- 72019-07-09"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 82019-07-09"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 92019-07-09"This USB media is incompatible." message appears on the LCD. What does it mean?
- 102019-07-09"This USB media cannot be used." message appears on the LCD. What does it mean?
- 112019-07-09"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 122019-07-09"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 132019-07-09"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 142019-07-09"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 152019-07-09"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 162018-08-06"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 172018-05-02"This file cannot be used." message appears on the LCD. What does it mean?
- 182016-07-29"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 192016-07-29"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 202016-07-29"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 212016-07-29"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 222016-07-29"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- 232016-07-29"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
- 242016-07-29"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 252016-07-29"OK to delete the setting?" message appears on the LCD. What does it mean?
- 262016-07-29"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 272016-07-29"Failed to save file." message appears on the LCD. What does it mean?
- 282016-07-29"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 292016-07-29"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 302016-07-29"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 312016-07-29"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 322016-07-29"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 332016-07-29"Transmitting by USB" message appears on the LCD. What does it mean?
- 342016-07-29"USB media error" message appears on the LCD. What does it mean?
- 352016-07-29"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 362016-07-29"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 372016-07-29"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 382016-07-29"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 392016-07-29"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 402016-07-29"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 412016-07-29"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 422016-07-29"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 432012-09-14"Preventive maintenance is recommended" appears on the LCD.