TD-4520TN
Vanliga frågor & felsökning |
23 Resultat
Sortera efter
- 12023-06-12Some parts of the label are not printed. (P-touch Editor 5.x for Windows)
- 22022-04-18My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
- 32021-12-13How to adjust the cut position (For Windows)
- 42021-12-13How to set the Direct Thermal or Thermal Transfer Print Methods
- 52021-03-02Printed barcodes cannot be read.
- 62021-01-29How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
- 72021-01-29How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
- 82020-08-19The printer does not start printing immediately
- 92020-05-28The printed label contains gray lines.
- 102020-02-20How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
- 112020-02-20When printing with the thermal transfer method, the print or cutting position gradually shifts.
- 122019-03-13The left or right side of the label is not printed correctly.
- 132019-03-13The printing position of small label is incorrect.
- 142019-03-13The label is skipped when printing.
- 152019-03-13The print quality is poor.
- 162019-03-13How to skip the AUTO.BAS program only one time by directly operating the printer
- 172019-03-13How to execute the printer configuration (Self-test) to debug
- 182019-03-13How to calibrate the Gap/Black Mark Sensor by directly operating the printer
- 192019-03-13Printing the printer configuration (Self-test)
- 202019-03-13How to change the speed and density in BarTender
- 212019-03-13How to change the printer code page
- 222019-03-13How to adjust the tear position in BarTender
- 232019-03-13How to adjust the printout position