TD-4750TNWBR
![]() |
Vanliga frågor & felsökning |
22 Resultat
Sortera efter
- 12023-06-12How can I use Crop Print function? (How to print multiple barcodes from a PDF file separately) (For Windows only)
- 22021-12-13How to adjust the cut position (For Windows)
- 32021-12-13How to set the Direct Thermal or Thermal Transfer Print Methods
- 42021-12-01How to calibrate the RFID
- 52021-12-01How to execute the printer configuration (Self-test) to debug
- 62021-12-01How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
- 72021-12-01How to calibrate the Gap/Black Mark Sensor by directly operating the printer
- 82021-12-01Printing the printer configuration (Self-test)
- 92021-01-29How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
- 102021-01-29How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
- 112020-06-24An RFID error occurred.
- 122020-06-24RFID calibration does not finish or fails. I cannot write RFID tags.
- 132020-02-20When printing with the thermal transfer method, the print or cutting position gradually shifts.
- 142020-02-19Printing is not possible.
- 152019-03-13The left or right side of the label is not printed correctly.
- 162019-03-13The printing position of small label is incorrect.
- 172019-03-13The print quality is poor.
- 182019-03-13How to change the speed and density in BarTender
- 192019-03-13How to change the printer code page
- 202019-03-13How to adjust the tear position in BarTender
- 212019-03-13How to adjust the printout position
- 222019-03-13How to add a new stock from the Seagull driver