TD-4420TN
 |
Vanliga frågor & felsökning |
19 Resultat
Sortera efter
- 12021-12-13How to adjust the cut position (For Windows)
- 22021-12-13How to set the Direct Thermal or Thermal Transfer Print Methods
- 32021-01-29How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
- 42021-01-29How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
- 52020-02-20How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
- 62020-02-20When printing with the thermal transfer method, the print or cutting position gradually shifts.
- 72019-03-13The left or right side of the label is not printed correctly.
- 82019-03-13The printing position of small label is incorrect.
- 92019-03-13The print quality is poor.
- 102019-03-13Printing is not possible.
- 112019-03-13How to skip the AUTO.BAS program only one time by directly operating the printer
- 122019-03-13How to execute the printer configuration (Self-test) to debug
- 132019-03-13How to calibrate the Gap/Black Mark Sensor by directly operating the printer
- 142019-03-13Printing the printer configuration (Self-test)
- 152019-03-13How to change the speed and density in BarTender
- 162019-03-13How to change the printer code page
- 172019-03-13How to adjust the tear position in BarTender
- 182019-03-13How to adjust the printout position
- 192019-03-13How to add a new stock from the Seagull driver
