Innov-is 1200
 |
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
39 Wyniki
Sortuj według
- 120/05/2024F** or "F*" appears on the LCD. What does it mean?
- 202/07/2018"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 304/06/2018"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 404/06/2018"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 504/06/2018"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 604/06/2018"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 731/03/2016"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 831/03/2016"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 931/03/2016"Saving..." message appearing on the LCD. What does it mean?
- 1031/03/2016"This embroidery pattern can not be used on this machine." message appearing on the LCD. What does it mean?
- 1131/03/2016"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 1231/03/2016"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 1331/03/2016"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 1431/03/2016"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 1531/03/2016"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 1631/03/2016"Finish editing the pattern before sewing the pattern." message appearing on the LCD. What does it mean?
- 1731/03/2016"Data volume is too large for this pattern." message appearing on the LCD. What does it mean?
- 1831/03/2016"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 1931/03/2016"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 2031/03/2016"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 2131/03/2016"Insert an embroidery card." message appearing on the LCD. What does it mean?
- 2231/03/2016"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 2331/03/2016"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 2414/05/2015"This key does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 2514/05/2015"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean?
- 2614/05/2015"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 2714/05/2015"Deleting..." message appearing on the LCD. What does it mean?
- 2814/05/2015"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 2914/05/2015"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 3014/05/2015"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 3114/05/2015"Selected a pattern." appears on the LCD.
- 3214/05/2015"Change to the single needle mode." appears on the LCD.
- 3307/04/2009"Lower the presser foot lever." appears on the LCD.
- 3407/04/2009"Lower the buttonhole lever." appears on the LCD.
- 3507/04/2009"Lift the buttonhole lever." appears on the LCD.
- 3607/04/2009"The safety device has been activated." appears on the LCD.
- 3726/02/2009"Transmitting by USB." message appearing on the LCD. What does it mean?
- 3826/02/2009"Reduce the number of patterns. Only up to 12 patterns can be handled." message appearing on the LCD. What does it mean?
- 3926/02/2009"Do not send a USB transmittion while embroidering." message appearing on the LCD. What does it mean?
