FAQs & Troubleshooting
Popular |
339 Results
- 1How to obtain and input PIN of machine
- 2Mat, Cutting Blade and Material Combinations
- 3E00002 appears on the computer screen.
- 4Instructions for sending patterns created in CanvasWorkspace to the cutting machine via a USB Cable [Video]
- 5ErrS07 appears on the computer screen.
- 6How to Activate an Accessory Kit* (Rhinestone, Emboss Kit, etc.) for the Cutting Machine.
- 7The Material to be Cut is Not Cleanly Cut with the Roll Feeder.
- 8ErrS90 appears on the computer screen.
- 9List of Error Messages
- 10How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 11ErrS09 appears on the computer screen.
- 12Instructions for Creating Roll Feeder Data with CanvasWorkspace and Sending It to the Cutting Machine
- 13How can CanvasWorkspace be installed or updated?
- 14Can the cutting machine cut all materials automatically with the auto blade?
- 15Embroidery data (.phc, .pes or .phx files) read from a USB flash drive is not displayed.
- 16How to use Standard Cut Blade Holder and Deep Cut Blade Holder
- 17E00001 appears on the computer screen.
- 18Settings for Specific Functions
- 19ErrS06 appears on the computer screen.
- 20Troubleshooting about the Mat
- 21How to Activate the Calligraphy Kit
- 22Can the cutting machine make half cuts/kiss cuts?
- 23How to Use the Roll Feeder Function [Video]
- 24E02003 appears on the computer screen.
- 25E01002 appears on the computer screen.
- 26E00009 appears on the computer screen.
- 27Half Cut (Kiss Cut) Settings
- 28Adjusting the Position of the Feed Roller
- 29About CanvasWorkspace
- 30"This data is too complicated and cannot be converted." message appearing on the LCD. What does it mean?
- 31Multiple data cannot be transferred to the machine at once
- 32N11003 appears on the computer screen.
- 33If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 34What should I do if I Cannot Connect My Machine to the Wireless Network?
- 35Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 36Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 37What should I do if the scanned and cut positions are misaligned?
- 38E92001 appears on the Artspira app screen.
- 39Data cannot be transferred even though the machine number has been input. (M5622201)
- 40Cutting with the Rotary Auto Blade [Video]
- 41Shortcut Keys for CanvasWorkspace (Windows/Mac)
- 42Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 43ErrS12 appears on the computer screen.
- 44ErrS10 appears on the computer screen.
- 45ErrS08 appears on the computer screen.
- 46ErrS01 appears on the computer screen.
- 47Draw Patterns with Calligraphy Pen
- 48About the Calligraphy Starter Kit
- 49Attaching the Material/Peeling Off the Material
- 50E94004 appears on the computer screen.