FAQs & Troubleshooting
![]() |
Popular |
75 Results
- 1Combination of fabric, thread and needle
- 2When thread got tangled.
- 3Fabric and Thread
- 4Embroidery
- 5Place a spool of thread on a spool pin.
- 6"Set the bobbin holder to the left." message appearing on the LCD. What does it mean and how do I clear it?
- 7Why does the lower thread keep breaking?
- 8Where do I put the oil in my machine?
- 9It is difficult to pass the thread through the needle bar thread guide(hook).
- 10How do I create a space between characters?
- 11How do I remove the presser foot holder?
- 12When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 13"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 14How do I raise or lower the feed dogs?
- 15How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 16"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 17Fabrics and stabilizer material for embroidery
- 18How do I correctly install a bobbin?
- 19"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
- 20"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 21Why is the outline sewing off the pattern?
- 22How do I sew an applique?
- 23"There is not much thread remaining in the bobbin." message appearing on the LCD. What does it mean and how do I clear it?
- 24"Can not read this disk. This disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?
- 25The thread tension is incorrect.
- 26How do I sew buttonholes?
- 27How do I sew such as vinyl, leather, quilting layers and velvet?
- 28How do I sew a blind hem?
- 29How do I thread my machine?
- 30How do I wind the bobbin?
- 31"Can not save to this disk. The disk may be defective. Change the disk and try to save again." message appearing on the LCD. What does it mean and how do I clear it?
- 32"The pattern is too large for the large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 33"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
- 34"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?
- 35"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 36"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 37"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?
- 38"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appearing on the LCD. What does it mean and how do I clear it?
- 39"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
- 40"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 41"This key does not operate when the needle is down. Raise the needle and press the key again." message appearing on the LCD. What does it mean and how do I clear it?
- 42"Data volume is too large for this pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 43"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 44"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
- 45Why does my thread keep jamming?
- 46"Lower the presser foot lever." appears on the LCD.
- 47"Formatting the floppy disk." message appearing on the LCD. What does it mean?
- 48"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" message appearing on the LCD. What does it mean and how do I clear it?
- 49"Can not format this disk. This may be the wrong type of disk, or the disk may be defective. Please change the floppy disk." message appearing on the LCD. What does it mean and how do I clear it?
- 50"This button does not operate when the embroidery unit is not attached. Turn off the powert and attach the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?