FAQs & Troubleshooting
Popular |
SuperGalaxie 3000/3100D
75 Results
1.
Combination of fabric, thread and needle
2.
Why does the lower thread keep breaking?
3.
"Set the bobbin holder to the left." message appearing on the LCD. What does it mean and how do I clear it?
4.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
5.
Fabric and Thread
6.
Embroidery
7.
Where do I put the oil in my machine?
8.
When thread got tangled.
9.
It is difficult to pass the thread through the needle bar thread guide(hook).
10.
Place a spool of thread on a spool pin.
11.
"This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, etc." message appearing on the LCD. What does it mean and how do I clear it?
12.
"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
13.
How do I create a space between characters?
14.
"Can not format this disk. This may be the wrong type of disk, or the disk may be defective. Please change the floppy disk." message appearing on the LCD. What does it mean and how do I clear it?
15.
Why does my thread keep jamming?
16.
How do I sew buttonholes?
17.
How do I correctly install a bobbin?
18.
"There is not much thread remaining in the bobbin." message appearing on the LCD. What does it mean and how do I clear it?
19.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appearing on the LCD. What does it mean and how do I clear it?
20.
"Data volume is too large for this pattern." message appearing on the LCD. What does it mean and how do I clear it?
21.
How do I raise or lower the feed dogs?
22.
The thread tension is incorrect.
23.
Why does the needle keep breaking?
24.
Fabrics and stabilizer material for embroidery
25.
How do I wind the bobbin?
26.
"There is a pattern included that can not be saved to a floppy disk. Save the pattern in the machine's memory." message appearing on the LCD. What does it mean and how do I clear it?
27.
"No disk inserted or this disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?
28.
"Change to the large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
29.
"This button does not operate when the embroidery unit is attached Turn off the power and remove the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?
30.
"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?