FAQs & Troubleshooting
Popular |
149 Results
- 51"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 52How do I clean the race?
- 53Embroidery
- 54How do I remove or attach the presser foot holder?
- 55How do I specify the sewing end point with the sensor pen for utility stitches/ character decorative stitches?
- 56If the thread breaks during sewing.
- 57"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 58"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
- 59"Sensor module error." message appears on the LCD. What does it mean?
- 60"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
- 61How do I change the volume of operation sounds or alarm sounds?
- 62How to specify the Guideline Marker Position With the Sensor Pen
- 63About Sensor Function Area
- 64How do I attach or remove the embroidery frame ?
- 65How do I adjust the clock on the display?
- 66How do I attach the walking foot ?
- 67How do I remove or attach the presser foot ?
- 68How do I set the bobbin ?
- 69"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 70"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 71"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 72How do I sew a blind hem?
- 73Fabrics and stabilizer material for embroidery
- 74When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 75How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 76How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 77How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 78How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 79How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 80How do I specify the sewing end point with the sensor pen for utility stitches?
- 81"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 82"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 83"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 84"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 85"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 86"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 87"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 88"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
- 89"Set the clock." message appears on the LCD. What does it mean?
- 90"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- 91"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
- 92"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
- 93"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 94"OK to delete the setting?" message appears on the LCD. What does it mean?
- 95"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 96"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 97"Failed to save file." message appears on the LCD. What does it mean?
- 98"An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 99"An invalid sewing area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 100How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)